Discover jobs
Job Search
drywall installer
Posted on October 09, 2024 by Employer details Madiz Construction
Job details
Education: Secondary (high) school graduation certificate. Work site environment: At heights. Dusty. Outdoors. Work setting: Commercial. Residential. Various locations. Tasks: Apply successive coats of compound and sand seams and joints. Clean and prepare surfaces. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Mix plaster ingredients to desired consistency. Mould and install ornamental plaster panels, cornices and trim. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Attach metal or gypsum lath to studs or furring. Work at heights, on scaffolding or swing stages. Erect and install scaffolding, falsework and other working platforms. Read and interpret blueprints, maps, drawings and specifications. Work conditions and physical capabilities: Bending, crouching, kneeling. Physically demanding. Repetitive tasks. Standing for extended periods. Walking. Weight handling: Up to 23 kg (50 lbs). Experience: 3 years to less than 5 years.- Location8771 Carson Way SWEdmonton, ABT6W 4M3
- Workplace information On site
- Salary$30.00HOUR hourly / 40 hours per week
- Terms of employment Permanent employmentFull time
- Day
- Starts as soon as possible
- vacancies 2 vacancies
- Source Job Bank #3112890
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
3 years to less than 5 years
On site
Work must be completed at the physical location. There is no option to work remotely.
Work site environment
- At heights
- Dusty
- Outdoors
Work setting
- Commercial
- Residential
- Various locations
Responsibilities
Tasks
- Apply successive coats of compound and sand seams and joints
- Clean and prepare surfaces
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Finish corners and angles and create decorative designs in finish coat, if required
- Measure, cut, fit and install drywall sheets
- Mix plaster ingredients to desired consistency
- Mould and install ornamental plaster panels, cornices and trim
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
- Attach metal or gypsum lath to studs or furring
- Work at heights, on scaffolding or swing stages
- Erect and install scaffolding, falsework and other working platforms
- Read and interpret blueprints, maps, drawings and specifications
Additional information
Work conditions and physical capabilities
- Bending, crouching, kneeling
- Physically demanding
- Repetitive tasks
- Standing for extended periods
- Walking
Weight handling
- Up to 23 kg (50 lbs)
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
Advertised until
2024-11-08
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: