Overview
Languages
English
Education
-
Secondary (high) school graduation certificate
Experience
1 to less than 7 months
On site
Work must be completed at the physical location. There is no option to work remotely.
Responsibilities
Tasks
-
Apply, level and smooth coats of plaster
-
Clean and prepare surfaces
-
Cure freshly plastered surfaces
-
Cut and install metal corner beads to protect exterior corners
-
Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
-
Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
-
Finish corners and angles and create decorative designs in finish coat, if required
-
Mould and install ornamental plaster panels, cornices and trim
-
Smooth out excess compound and allow coat to dry
-
Tape over joints using taping machine and embed tape in compound
-
Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
-
Attach metal or gypsum lath to studs or furring
-
Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
-
Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
-
Install corner beads and wire mesh around beams to which plaster is to be applied
-
Install exterior and interior steel studs
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.