7310216
Loading, please wait...

drywall taper

Posted on November 23, 2024 by Employer details Sunstone Custom Homes Ltd.

Job details

  • LocationSurrey, BC
  • Workplace information On site
  • Salary28.85 hourly / 40 hours per week
  • Terms of employment Permanent employmentFull time
  • Day, Evening, Morning
  • Starts as soon as possible
  • vacancies 5 vacancies
  • Source Job Bank #3162697

Overview

Languages

English

Education

  • Secondary (high) school graduation certificate

Experience

2 years to less than 3 years

On site

Work must be completed at the physical location. There is no option to work remotely.

Responsibilities

Tasks

  • Apply successive coats of compound and sand seams and joints
  • Apply, level and smooth coats of plaster
  • Clean and prepare surfaces
  • Cure freshly plastered surfaces
  • Cut and install metal corner beads to protect exterior corners
  • Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
  • Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
  • Finish corners and angles and create decorative designs in finish coat, if required
  • Measure, cut, fit and install drywall sheets
  • Mix plaster ingredients to desired consistency
  • Mould and install ornamental plaster panels, cornices and trim
  • Position and secure sheets to metal or wooden studs or joists
  • Smooth out excess compound and allow coat to dry
  • Spray acoustic or texture materials over walls and ceilings
  • Tape over joints using taping machine and embed tape in compound
  • Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
  • Attach metal or gypsum lath to studs or furring
  • Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
  • Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
  • Install corner beads and wire mesh around beams to which plaster is to be applied
  • Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
  • Prepare wall and ceiling layouts
  • Work at heights, on scaffolding or swing stages
  • Erect and install scaffolding, falsework and other working platforms
  • Read and interpret blueprints, maps, drawings and specifications

Who can apply to this job?

Only apply to this job if:

  • You are a Canadian citizen, a permanent or a temporary resident of Canada.
  • You have a valid Canadian work permit.

If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.

Advertised until

2024-12-23

Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.

Report a problem with this job posting
*What’s wrong?

Thank you for your help!

You will not receive a reply. For enquiries, please contact us.

Sunstone Custom Homes Ltd.

  • Construction
  • 35 job postings advertised
  • Medium-sized business (between 5 and 100 employees)
  • 1 business location
  • View business profile

Plus account

Cut down on your job search time by allowing employers to find you!

Sign up now!

Other job posting options

Job market information

drywall taper NOC 73102 Lower Mainland–Southwest Region
Median wage Help -
27.50 $/hour

Explore this career

Date modified: